Eclipse Combustion F8000 Series Service/ Betriebsanleitung PDF herunterladen (Seite 39)

3-11

OUTWARD until it locks.

b. To Manually Lower or Raise the Platform

• To lower lift, insert pump handle extension onto backup pump release valve. Make sure

notches at end of handle are fully engaged by release valve pin. Slowly twist handle 1/4-

turn COUNTER-CLOCKWISE until lift platform begins to lower, allow platform to reach

stow level or ground level, then turn handle extension CLOCKWISE to close valve.

• To raise lift, insert handle extension into backup pump handle socket and move pump

handle in an UP/DOWN motion to raise platform to stow level or vehicle floor level.

c. To Manually Stow the Lift

• Using backup pump, manually raise or lower platform to about 1-inch above stow level.

• At front of lift, position PLATFORM LOCK HANDLE to RIGHT and push sliding platform

INWARD until it locks.

• Insert pump handle extension onto manual backup pump release valve. Make sure

notches at end of handle are fully engaged by release valve pin. Slowly twist handle 1/4-

turn COUNTER-CLOCKWISE until lift platform begins to lower, allow platform to stop at

stow level, then turn handle extension CLOCKWISE to close valve.

• Release and lower LEFT handrail into stowed position then release and lower RIGHT

handrail.

WARNING

TO PREVENT PINCHING FINGERS, PUSH PLATFORM INWARD USING AN OPEN,

FLAT HAND AND EXTREME CAUTION.

• At left-side of lift enclosure, position deploy lock handle DOWN, then push platform

INWARD to its fully stowed position.

• If equipped with optional lift cover, close and latch cover.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 76 77

Keine Kommentare

Eclipse Combustion F8000 Series Service/ Betriebsanleitung Seite 39